Feedback


employee-feedback-examples-the-good-the-bad-and-the-ugly-and-how-to-give-effective-feedbackAny feedback, questions or suggestions on the software or site can be left here.

For questions about the Olive, please refer to the AVS forum.

 

 

 

Write a new entry for the Guestbook

 
 
 
 
 
 
Fields marked with * are required.
Your E-mail address won't be published.
For security reasons we save the IP address 3.232.96.22.
It's possible that your entry will only be visible in the guestbook after we reviewed it.
We reserve the right to edit, delete, or not publish entries.
22 entries.
Gert-jan wrote on January 1, 2022 at 09:24:
Any feedback, questions or suggestions on the software or site can be left here. For questions about the Olive, please refer to the AVS forum!
Vincent Buuron wrote on December 21, 2020 at 13:45:
Hoi, Ik heb 'n Olive 3 HD die bij het opstartscherm blijft 'hangen'. Is het mogelijk 'n SW of OS versie te vinden ? De versie die ik hier kan downloaden verhelpt het probleem niet. Met vriendelijke groet, Vincent Buuron
Reply by: Gert-jan
Sorry voor de vertraging, er zat een Corona vertraging tussen... De software moet goed zijn, meerdere mensen hebben deze al gebruikt, waaronder ik zelf. Het hangen in het opstartscherm is al veel mensen overkomen (mijzelf met een Olive Opus 4). Sommige konden worden hersteld, maar velen zijn met een kapotte board afgeschreven. Er kan dus meer aan de hand zijn, daarvoor moet je verder troubleshooten. Je kan het vragen via het avforum, maar alle ervaren mensen lijken daar weg te zijn. Succes! mvg Gertjan
James L Dottavi wrote on December 1, 2020 at 22:46:
I'm building the BoosteR-CDE from the gerber files in the download directory. I had some boards made by Seeed Fusion. There seems to be a reversal in the circuit board of pin 2 (output) and pin 3 (input) on IC3 the LM350 adjustable voltage regulator. Regards Jim
Reply by: Gert-jan
The Booster-CDE is not yet tested. The LM350 pinout 2 and 3 are indeed wrongly reversed. Also the LM350 should not be connected to the same heatsink as the driver. A separate post will be made about this schematic, as soon as I have the time...
Janusz wrote on November 15, 2020 at 17:42:
Great article, just bought a second-hand device Olive 03HD. I would like to replace the disk and after initiate recovery mode but there is a big problem. Links you provided in pdf ODBInstall.tar.gz & RecoveryCD.img do not exist on the servers. Where can I download them from another location or ask for links to new servers ? Thank you in advance.
Reply by: Gert-jan
https://www.lydo.nl/download/?dir=Olive%2FO3HD Succes, best regards.
james swarbrik wrote on August 25, 2020 at 04:00:
Hi Gert-Jan I tried to do a restore with the image file you had for a 03HD as it lost all connection to the albums - even though they were there when I ssh in. I did a restore and get the error "can't find html4.css make sure env variable KDEDIR is set correctly or you execute the binary in the correct path. In the KDEDIR points to or in the dir the executable is located there has to be the file share/apps/khtml/css/html4.css" ... is there anyway I can e.g. ssh in at this stage and see if the file is there and set the env variable - it looks like I can't - any tips would be great. Otherwise it's a brick.
Reply by: Gert-jan
James was advised to reformat the hard disk via an external computer and try again on the install. This helped since the partitions were correctly created after that. Unfortunately, the music was gone... That is the reason that I rip my music from CD's on a computer and store the music on a separate server and hard disk (in both MP3 and FLAC).
David Parkin wrote on August 2, 2020 at 07:28:
Well, I was about to invest in a second hand Olive 03HD. Looking at your site has firmly put me off spending money on the device!
Reply by: Gert-jan
Wise decision!
Michał wrote on January 17, 2020 at 09:23:
Hello I have a request you can dump bios for olive04hd Firmware 3.0. ? I read the guide and I can't upload the software I did different ways I still have a frozen display "System starting up Please wait" You know who has firmware? Best Regards Michal
Reply by: Gert-jan
Firmware v3.0 is not something to be downloaded. It is either part of the latest software or something external, beyond my reach. Please use the AV forum for these kind of questions. But in this case, if you are sure that you did everyting right and the Olive cannot be put in the update mode, then the unit is probably broken for good. Even if the update does not work, you should be able to let the unit ask for updates. You are not the first and probably not the last...
Andrea RICCI wrote on September 23, 2019 at 06:13:
Dear Lydo, thanks for the manual, you give me and many others hope. There's one basic thing which is not clear form the start of the manual. Should the sequence you describe start with a Win PC connected via ethernet to the olive or should we first backup the library on a drive (such a USB drive) and then connect that drive to the PC and run the whole sequence with this set up (disconnected from the real Olive equipment)? I have a second question : by any chance do I understand you're talking about an app (to select and play Olive based music from iOS devices) which is more stable than the lousy one we used to download until recently from the App Store ? Many thanks in advance
Reply by: Gert-jan
The app, I'm referring to is the old app from Olive for Android, not for IOS. For the exporter program, it is technically possible to export directly from the Olive but I would recommend that you use a backup. Then attach the backup to the windows PC (after installing Ext2fds) and then use the program to export all data, as described in the manual.
joerg wrote on June 20, 2019 at 16:56:
Hi Gert Jan, I'm desperatly seeking the iOS *ipa app for the Olive One. kind regards Joerg
Reply by: Gert-jan
The IOS App is 32 bits (IOS 12 requires 64 bits) and can not be downloaded from the Appstore anymore. You can download my version from https://www.lydo.nl/download/Olive/Android%20App/OliveApp.ipa, but you might need a Jailbreak on your telephone. My advice is to use the Safari Browser with the address of the Olive: http://192.168.1.xxx/olive_opus.php
Kris wrote on October 19, 2018 at 19:52:
Hi, I just bought used Olive 03HD with old „sw version 0.4.1.8”. Can I upgrade soft now using a file “SWUpgrade.tar” from downloads?
Reply by: Gert-jan
Yes, that is the file to use.